$45.00

  • Wireless Australian Standard – AS 3786 2014 Compliant Smoke Alarms
  • Fully compliant with new 2022 QLD Legistration – Certificate of compliance issued
  • Free remotes controller testing and fault finding (it also allows occupants to silence false alarms)
  • 2 year warranty as all units
  • Free replacement of any defective alarm (excluding deliberate damage) within warranty period
  • 10 year battery life (sealed battery units)
  • Prompt and efficient installation after order placement.
  • ABN Registered Gold Coast Company.
Category:

Description

The wireless interconnected remote controller is a supplementary device that can work with the wireless interconnected smoke alarms, interconnected carbon monoxide detectors, wireless heat alarm, and so on. The main function of the remote controller is to “Test” and “Silence” the interconnected wireless detectors.

According to the regulation, the detectors should be tested every week to make sure the detectors are still working properly.

By installing the remote controller on the wall, you can easily test the smoke alarm by simply one pressing the “TEST” button on the remote controller. You don’t have to take a swabber or rod or sticker to press the detectors on the ceiling.

The wireless remote controller is powered by a DC12V small Alkaline battery and cable-free. the battery life is about 2-3 years. There is a backup bracket for easily be installed in the wall.

Ad there is the “Hush” button on the remote controller. When there is a false alarm, or you have solved the fire situation, you can easily press the “HUSH” button to make the detector silent.

Silence function available only when the detector triggered, rather than being tested. Do not press the “Hush” button when you are just testing the detectors. The detectors will be silenced after the testing, which takes about 8-15 seconds.

When one of the detectors triggered, all the detectors in the group will sound at the same time. Pressing the “Hush” button, all the detectors will keep silent, except the detector that detected the real fire. So that you can easily know which floor or which area is one fire.

This wireless remote controller is just an optional device. You can test the detectors by press the testing button on the detectors as well.

Click below to know more about the detectors that can be controlled by the remote controller.

Wireless interconnected smoke alarm

WIFI interconnected smoke alarms with mobile App notification optional. click for more information

Wireless interconnected Carbon monoxide detector